IKEA RÅSKOG Cart Tumbler Holder - Fits Stanley Quencher, YETI, Owala FreeSip, Tervis - 3D Printed Cup Holder

⬇️ TAP/CLICK "View full item details" TO SEE SIZES, COMPATIBILITY & COLORS ⬇️
⸻

📌 IMPORTANT: ACCESSORIES ONLY — CART NOT INCLUDED!

This listing is for a 3D-printed tumbler/bottle holder that mounts to your IKEA RÅSKOG or RÅSHULT utility cart. The cart itself is not included.

🔗 Looking for a version with a handle slot? Check my Tumbler/Cup Holder w/ Handle Slot listing!
⸻

🛠 ABOUT THIS HOLDER

A 3D-printed cup holder designed specifically for IKEA RÅSKOG and RÅSHULT utility carts. Many customers also use them on third-party Amazon carts (Lexington, etc.) — though I haven't personally tested those.

Now offered in 4 versions because one size doesn't fit all. Whether you've got a Stanley Quencher, a YETI tumbler, an Owala FreeSip, or a Tervis, there's a version sized just for it.

✔ Holds your tumbler, bottle, pens, tools — securely and accessibly
✔ 30+ colors to match your setup
✔ Designed to mount securely on the outside of the cart
⸻

📏 CHOOSE YOUR VERSION (all $12.00)

🔹 YETI 20oz / Tall Straight Fit
✔ 101.6mm (4") inner height
✔ 80mm (3.1") inner diameter
✔ Best for straight tumblers (YETI 20oz) and craft tools
🚫 Does NOT fit Stanley Quenchers

🔹 Stanley Quencher 30/40oz (Post-2022)
✔ 70mm (2.75") inner height
✔ 80mm (3.1") inner diameter
✔ Fits Stanley 40oz and 30oz Quenchers (post-2022, without a boot)
💡 Have an older Stanley? Message me — early versions are slightly smaller.

🔹 Tervis 24oz / Wider Cups
✔ 75mm (2.95") inner height
✔ 83mm (3.26") inner diameter
✔ Great for 24oz Tervis tumblers and other wider bottles

🔹 Owala FreeSip 40oz
✔ 91mm (3.58") inner height
✔ 92mm (3.6") inner diameter
✔ Sized for Owala FreeSip 40oz

📌 Not sure which to pick? Message me with your tumbler brand and model — I'll point you to the right one.
⸻

✅ COMPATIBILITY CHECKLIST

✔️ RÅSKOG (2024 and earlier)
✔️ RÅSKOG 2025 — 30 3/8" (Article: 105.867.84)
✔️ RÅSKOG 2025 — 24" (Article: 505.917.69)
✔️ RÅSHULT [Discontinued] (Article: 204.630.56)

💬 Not sure about your model? Just ask before purchasing!
⸻

⚠️ IMPORTANT CARE NOTES
🚫 CLEANING: Not dishwasher safe — wipe clean with a damp cloth.
🔥 HEAT: PLA+ colors: avoid extreme heat (100°F+) and direct sunlight. PETG colors: more heat-tolerant. Indoor use recommended.
⸻

🎨 CHOOSE YOUR COLOR
30+ colors available to match your setup! Please use the exact color names shown in the color guide.
✔ Want different colors across multiple holders? Mention your preferred combo in the order notes.
⸻

🎨 NEW — SMOOTH OR TEXTURED
Something new I've been playing with. Use the dropdown to pick your finish — both are the same price.

✔️ Smooth — the standard finish. Clean, flat surfaces.
✔️ Textured — a fine matte surface, called "fuzzy skin" in the 3D printing world. Soft, slightly grippy feel, and it hides fingerprints and light scratches better than smooth does. It's become my favorite of the two.

Take a look at the photos to see them side by side — it's much easier to see than describe.

The texture is cosmetic only and sits on the outer faces, so fit and function are identical either way. Not sure? Go with smooth — that's what ships if you leave the dropdown alone.
⸻

🧪 MATERIAL NOTE
I print in two premium materials depending on color:
- PLA+ — strong, durable, widest color range
- PETG — extra heat-resistant and flexible
Check the color guide for which material your chosen color uses. Both priced the same — no upcharge for PETG!
⸻

✨ PLEASE NOTE
Minor surface imperfections are normal due to the 3D printing process. Each piece is made to order, so slight variations in texture, color, or layer lines may occur — these don't affect fit, strength, or function.
⸻

🔗 COMPLETE YOUR RÅSKOG SETUP
Pair this with the rest of my RÅSKOG cart accessories:
- Cup/Mug Holder w/ Handle Slot — for handled mugs and travel cups
- Sliding Top Tray — extra workspace on top of the cart
- Trash Bag Holder — clip-on bag for trim/scraps
- Adjustable Divider — split your cart shelves into custom zones
Check my shop for the full RÅSKOG accessory line!
⸻

📸 SEE MORE
For more photos, updates, and new releases visit my Instagram:
👉 @mikesthingamajigs
⸻

💡 WHY BUY FROM ME?
✔ Over 1,400 five-star reviews across my shop
✔ Star Seller with fast response times (usually within a few hours)
✔ Custom-designed right here in Maryland for a precise, secure fit
✔ Printed in premium PLA+ or PETG — no cheap filament
✔ Made to order with every color matched to the guide
✔ Any issue with your order? Message me and I'll make it right.
— Mike

Materials: PLA Plus, PETG.