Console Dock Shelf for 1/4" Pegboard - 3D Printed Wall Mount for Switch 2 Generation Docks - 30+ Colors

⬇️ TAP/CLICK "Learn more about this item" FOR FEATURES, SIZING & COMPATIBILITY! ⬇️
⸻

📌 IMPORTANT: ACCESSORIES ONLY — PEGBOARD AND CONSOLE NOT INCLUDED!

This listing is for the 3D-printed dock shelf only. The pegboard, console, dock, controllers, and accessories shown in photos are not included.

🚨 IMPORTANT — 3/16" PEGBOARD ONLY!

This shelf is designed specifically for 3/16" (~4.75mm) thick pegboards. It will NOT fit thinner 1/6" or thicker full 1/4" pegboards. Please measure your board before ordering — see Compatibility section below.
⸻

🛠 ABOUT THIS SHELF

A precision-fit shelf designed to hold a newer-generation game console dock on your 1/4" pegboard. Get your gaming setup off your desk and onto the wall — clean, organized, and ready to play. Designed with airflow and cable management built in so your console can stay docked without overheating or cable chaos.

✔ Sized specifically for the Switch 2 generation dock (larger than original Switch dock)
✔ Open-back design — easy cable management, no port blockage
✔ Bottom airflow vents — keeps your console cool during long sessions
✔ Direct 1/4" pegboard attachment — no extra hardware
✔ Strong, wobble-free fit
✔ 30+ colors to match your gaming setup 🎨
⸻

🎮 TESTED COMPATIBILITY

The dock shelf is precision-sized for:
✔ Nintendo Switch 2 dock
✔ Other docks with similar dimensions (newer-generation handheld console docks)

⚠️ Have an older console (original Switch, Switch OLED) or different setup? Check my "Game Console Dock Shelf for IKEA SKÅDIS Pegboard" listing — that one fits the original Switch dock generation. Or message me with your dock dimensions for a custom version.

📌 Note: This listing is for the dock shelf only. I am not currently offering a Joy-Con/controller hook or bundle for this model — but I can design custom versions on request.
⸻

✅ COMPATIBILITY

🚨 IMPORTANT: This listing is sized for 3/16" (~4.75mm) pegboard thickness ONLY.

Pegboard thickness varies even for boards labeled "1/4"." Before ordering, please measure your board's thickness — this product is designed specifically for 3/16" / ~4.75mm thick pegboards.

✔ FITS:
- Standard 1/4" pegboards with 3/16" (~4.75mm) actual thickness
- 1" hole spacing
- Wood and metal pegboards

❌ DOES NOT FIT:
- Thinner boards: 1/6" (~4mm) — hooks will be too loose
- Thicker boards: full 1/4" (~6.35mm) — hooks won't snap in

⚠️ Painted Pegboards: Painted boards often result in a tighter fit due to paint buildup. Heavier paint = tighter fit.

⚠️ Not sure of your board's thickness? Measure it with a ruler or caliper before ordering. If you need a different thickness version, message me first — happy to make a custom version.
⸻

⚠️ IMPORTANT CARE NOTES
🚫 CLEANING: Not dishwasher safe — wipe clean with a damp cloth.
🔥 HEAT: PLA+ colors: avoid extreme heat (100°F+) and direct sunlight. PETG colors: more heat-tolerant. Indoor use recommended.
⸻

🎨 CHOOSE YOUR COLOR
30+ colors available to match your gaming setup! Please use the exact color names shown in the color guide.
⸻

🧪 MATERIAL NOTE
I print in two premium materials depending on color:
- PLA+ — strong, durable, widest color range
- PETG — extra heat-resistant and flexible
Check the color guide for which material your chosen color uses. Both priced the same — no upcharge for PETG!
⸻

💎 Special Edition Upgrade (While Supplies Last)
Some colors are part of my SE line — translucent, more heat-resistant. Discontinuing to make room for new options, so while supplies last, SE options are available at standard price. Once sold out, not restocked.
⸻

✨ PLEASE NOTE
Minor surface imperfections are normal due to the 3D printing process. Each piece is made to order, so slight variations in texture, color, or layer lines may occur — these don't affect fit, strength, or function.
⸻

🔗 COMPLETE YOUR GAMING SETUP
Pair this shelf with the rest of my 1/4" Pegboard accessories:
- Controller Mount for 1/4" Pegboard — wall holder for Xbox, PlayStation, Switch Pro
- 1/4" Pegboard Hooks — Multi-Purpose Small/Medium/Large + J styles
- 1/4" Pegboard Bins — for game cases, accessories, small parts
- Slanted Pencil Holder — for pens, markers, gaming accessories
- Storage Tube Organizer — for charging cables, longer accessories
⸻

📸 SEE MORE
For more photos, updates, and new releases visit my Instagram:
👉 @mikesthingamajigs
⸻

💡 WHY BUY FROM ME?
✔ Over 1,200 five-star reviews across my shop
✔ Star Seller with fast response times (usually within a few hours)
✔ Custom-designed right here in Maryland for a precise, secure fit
✔ Printed in premium PLA+ or PETG — no cheap filament
✔ Made to order with every color matched to the guide
✔ Any issue with your order? Message me and I'll make it right.
— Mike

Materials: PLA Plus, PETG.