Pickleball Paddle Wall Mount - 3D Printed with Screw or Command Strip Install - Universal Paddle Fit - 30+ Colors

⬇️ TAP/CLICK "Learn more about this item" FOR FEATURES, INSTALL & COMPATIBILITY! ⬇️
⸻

📌 IMPORTANT: ACCESSORIES ONLY — PADDLES NOT INCLUDED!

This listing is for a 3D-printed pickleball paddle wall mount only. The paddles shown in photos are not included.
⸻

🛠 ABOUT THIS MOUNT

A clean, low-profile pickleball paddle wall mount designed to look great whether you have one paddle or a wall of them. Wide cradle arms hold the paddle by its shoulders, leaving the grip exposed for easy grab-and-go. The mount itself sits hidden behind the paddle — no bulky brackets, no eye-clutter.

Designed by a player, for players. After trying every off-the-shelf paddle holder I could find, I designed this one to actually look nice on a wall, fit any paddle I'd thrown at it, and install in under 5 minutes.

✔ Universal paddle fit — works with paddles from ~7" to 8.5"+ wide
✔ Hidden behind the paddle — clean wall, no visual clutter
✔ Choose your install — drywall screws (included) OR 3M Command Strips (sold separately)
✔ Wide cradle arms support the paddle without scratching grip tape
✔ 30+ colors to match your wall, decor, or paddle aesthetic 🎨
✔ Available as singles, 2-packs, or 4-packs for paddle walls
⸻

🎾 TESTED FIT WITH

Confirmed compatibility with major paddle brands:
✔ JOOLA (Perseus, Hyperion, Solaire, etc.)
✔ Selkirk (Vanguard, Power Air, etc.)
✔ Paddletek (Tempest, Bantam)
✔ Bread & Butter (Drip Contender, Filth)
✔ Engage (Pursuit, Encore)
✔ Fatboy
✔ Six Zero, CRBN, Volair, Vatic Pro, Diadem
✔ Most other standard pickleball paddles

⚠️ Have an unusually wide or unusually shaped paddle? Message me with measurements and I'll confirm fit or design a custom version.
⸻

🔨 INSTALLATION OPTIONS

Each mount has 2 mounting holes for flexible install:

✔ DRYWALL SCREWS (Included)
2 drywall screws are included with every mount for permanent installation. Use a level for clean alignment, drill pilot holes, and you're done in 5 minutes.

✔ 3M COMMAND STRIPS (Sold Separately — Recommended for Renters)
For damage-free mounting, the mount is designed to work with Medium or Large 3M Command Strips. Available at most hardware stores and big-box retailers.

💬 Want a Command Strip included with your order? Just message me — happy to add one for $2 each.
⸻

📦 CHOOSE YOUR PACK SIZE

✔ 1 Mount — $13
For a single paddle, testing the mount, or replacing an old hanger.

✔ 2-Pack — $24 (saves $2)
For couples, doubles partners, or his-and-hers setups.

✔ 4-Pack — $44 (saves $8)
For pickleball households, family setups, or paddle wall displays.

💬 Need a different quantity (3, 6, 8)? Just message me and I'll set up a custom order at the same per-mount discount rate.
⸻

📏 DIMENSIONS

📌 Mount width: ~110mm (~4.3")
📌 Mount height: ~80mm (~3.1")
📌 Wall protrusion: ~25mm (~1") — paddle sits flush against the wall
📌 Cradle width: fits paddle widths from ~7" to 8.5"+
⸻

⚠️ IMPORTANT CARE NOTES
🚫 CLEANING: Wipe clean with a damp cloth. Not dishwasher safe.
🔥 HEAT: PLA+ colors: avoid extreme heat (100°F+) and direct sunlight. PETG colors: more heat-tolerant. Indoor use recommended for both.
⚠️ WEIGHT: Designed for typical pickleball paddle weights (7-9 oz). For heavier wood or specialty paddles, drywall screws recommended over Command Strips.
⸻

🎨 CHOOSE YOUR COLOR
30+ colors available to match your wall, decor, or paddle setup! Please use the exact color names shown in the color guide.
✔ Want different colors across multiple mounts in a pack? Mention your preferred combo in the order notes!
⸻

🧪 MATERIAL NOTE
I print in two premium materials depending on color:
- PLA+ — strong, durable, widest color range
- PETG — extra heat-resistant and flexible
Check the color guide for which material your chosen color uses. Both priced the same — no upcharge for PETG!
⸻

💎 Special Edition Upgrade (While Supplies Last)
Some colors are part of my SE line — translucent, more heat-resistant. Discontinuing to make room for new options, so while supplies last, SE options are available at standard price. Once sold out, not restocked.
⸻

✨ PLEASE NOTE
Minor surface imperfections are normal due to the 3D printing process. Each piece is made to order, so slight variations in texture, color, or layer lines may occur — these don't affect fit, strength, or function. Paddles not included.
⸻

📸 SEE MORE
For more photos, updates, and new releases visit my Instagram:
👉 @mikesthingamajigs
⸻

💡 WHY BUY FROM ME?
✔ Over 1,200 five-star reviews across my shop
✔ Star Seller with fast response times (usually within a few hours)
✔ Custom-designed right here in Maryland for a precise, secure fit
✔ Printed in premium PLA+ or PETG — no cheap filament
✔ Made to order with every color matched to the guide
✔ Any issue with your order? Message me and I'll make it right.
— Mike