IKEA SKÅDIS Magnetic Snap-On Storage Cups - 3D Printed for Pegboards and Råskog Carts - Crafts, Sewing - 30+ Colors

⬇️ TAP/CLICK "Learn more about this item" FOR FEATURES, SIZING & CUSTOMIZATION! ⬇️
⸻

📌 IMPORTANT: ACCESSORIES ONLY — PEGBOARD/CART NOT INCLUDED!

This listing is for a 3D-printed magnetic shelf with snap-on storage cups. Mounts to your IKEA SKÅDIS pegboard or RÅSKOG utility cart. The pegboard or cart itself is not included.
⸻

🛠 ABOUT THESE STORAGE CUPS

A magnetic shelf system with snap-on cups that pop right off when you need them. Each cup snaps securely onto the shelf base with a strong magnet — easy to remove for use, easy to put back. No fumbling with hooks, no rattling around your cart.

Customer favorite: "The magnetic cups are the BEST. The magnets are strong enough so they can't be easily knocked off if bumped, but they're not too strong to where you're pulling on them strongly."

✔ Magnetic snap-on cups — pop off, use, snap back
✔ Each set comes with a shelf base + 3 cups
✔ Multiple cup heights for different items (Short, Medium, Tall, 6in)
✔ Mix and match sizes within a single shelf
✔ Switches between pegboards and carts — just choose your hook style
✔ 30+ colors to match your setup 🎨
⸻

📏 CUP SIZES (INNER DIAMETER 2.45" / 62.2MM)

📌 Short — 41mm (1.6") tall — coins, beads, screws, push pins, paper clips
📌 Medium — 78mm (3.07") tall — pens, brushes, scissors, markers
📌 Tall — 93mm (3.66") tall — longer tools, slim bottles
📌 6in — 150mm (6") tall — paintbrushes, tall art supplies, longer reach

💡 Need a custom size? Just message me — I've made oversized versions for paintbrushes and longer tools.
⸻

📦 CHOOSE YOUR CUP COMBO

Pick the cup combination that fits your needs:

✔ 3× Short — three small cups for fine items
✔ 3× Medium — three mid-size cups for everyday tools
✔ 3× Tall — three deep cups for taller items
✔ 3× 6in — three extra-tall cups for paintbrushes and long supplies
✔ One of Each (Short/Medium/Tall) — variety pack
✔ Mixed (2× Tall + 1× Short) — popular combo
✔ Mix and Match — pick any 3 sizes (Short/Medium/Tall), tell me your combo in the order notes

🎨 Want a different combo? Pick "Mix and Match" and tell me which sizes you want in the order notes — any combination of Short, Medium, Tall (6in cups not included in this option).
⸻

🔗 CHOOSE YOUR HOOK TYPE

Specify your hook style in the personalization field:

✔ SKÅDIS — for IKEA SKÅDIS and UPPSPEL pegboards
✔ RÅSKOG Standard — for IKEA RÅSKOG and RÅSHULT carts
✔ BRÄNNBOLL — for the BRÄNNBOLL rolling unit

✨ Want translucent mounting hooks for a cleaner look? Mention it in the personalization field — available at no extra cost.
⸻

✅ COMPATIBILITY CHECKLIST

✔ IKEA SKÅDIS and UPPSPEL Pegboards
✔ RÅSKOG (2024 and earlier)
✔ RÅSKOG 2025 — 30 3/8" (Article 105.867.84)
✔ RÅSKOG 2025 — 24" (Article 505.917.69)
✔ RÅSHULT [Discontinued]
✔ BRÄNNBOLL Rolling Storage Unit

⚠️ Using a non-IKEA pegboard or cart? Message me to confirm fit before ordering.
⸻

⚠️ IMPORTANT CARE NOTES
🚫 CLEANING: Not dishwasher safe — wipe clean with a damp cloth.
🔥 HEAT: PLA+ colors: avoid extreme heat (100°F+) and direct sunlight. PETG colors: more heat-tolerant. Indoor use recommended.
⚠️ MAGNETS: Contains strong neodymium magnets. Keep away from young children and pets — magnets can cause serious injury if swallowed.
⸻

🎨 CHOOSE YOUR COLOR
30+ colors available to match your setup! Please use the exact color names shown in the color guide.
✔ Want different colors for the shelf vs the cups? Mention your preferred combo in the order notes!
⸻

🧪 MATERIAL NOTE
I print in two premium materials depending on color:
- PLA+ — strong, durable, widest color range
- PETG — extra heat-resistant and flexible
Check the color guide for which material your chosen color uses. Both priced the same — no upcharge for PETG!
⸻

💎 Special Edition Upgrade (While Supplies Last)
Some colors are part of my SE line — translucent, more heat-resistant. Discontinuing to make room for new options, so while supplies last, SE options are available at standard price. Once sold out, not restocked.
⸻

✨ PLEASE NOTE
Minor surface imperfections are normal due to the 3D printing process. Each piece is made to order, so slight variations in texture, color, or layer lines may occur — these don't affect fit, strength, or function.
⸻

🔗 COMPLETE YOUR SETUP
Pair these cups with the rest of my SKÅDIS and RÅSKOG accessory lines:
- Custom Pegboard Bins — individual hook-mounted bins, any size
- 3-Bin Drop-In Organizer — modular bin frame for pegboards and carts
- Multi-Tier Shelf Bin — tiered organizer
- Adjustable Cart Dividers — split your RÅSKOG tray
- Tumbler / Bottle Holder — for Stanley, YETI, Owala, Tervis

💎 Save with a bundle! Check my "IKEA SKÅDIS Pegboard Accessories Bundle" or "IKEA RÅSKOG Cart Accessories Bundle" for curated multi-product sets.
⸻

📸 SEE MORE
For more photos, updates, and new releases visit my Instagram:
👉 @mikesthingamajigs
⸻

💡 WHY BUY FROM ME?
✔ Over 1,200 five-star reviews across my shop
✔ Star Seller with fast response times (usually within a few hours)
✔ Custom-designed right here in Maryland for a precise, secure fit
✔ Printed in premium PLA+ or PETG — no cheap filament
✔ Made to order with every color matched to the guide
✔ Any issue with your order? Message me and I'll make it right.
— Mike

Materials: Neodymium Rare Earth Magnets, PLA Plus, PETG.