IKEA SKÅDIS Pegboard Bins - 3D Printed Storage for RÅSKOG, Brännboll, Lexington Carts - Multiple Sizes - 30+ Colors

⬇️ TAP/CLICK "View full item details" TO SEE SIZES, COMPATIBILITY & COLORS ⬇️
⸻

📌 IMPORTANT: ACCESSORIES ONLY — PEGBOARD/CART NOT INCLUDED!

This listing is for 3D-printed bins that mount to your IKEA SKÅDIS or UPPSPEL pegboard, or to a RÅSKOG, RÅSHULT, BRÄNNBOLL, or Simply Tidy Lexington utility cart. The board or cart itself is not included.
⸻

🛠 CUSTOM BINS FOR PEGBOARDS AND CARTS

Versatile 3D-printed bins designed to fit IKEA SKÅDIS and UPPSPEL pegboards, plus RÅSKOG, RÅSHULT, BRÄNNBOLL, and Simply Tidy's Lexington utility carts. Own both a board and a cart? Just swap the hooks to move bins between setups.

✨ Want a sleeker look? Translucent mounting hooks available — just mention it in your order notes.

💪 Strong & Durable — One Size 5 bin holds 25 AA + 25 AAA batteries with no issue (see photos for proof).
⸻

📏 BIN SIZING & CUSTOMIZATION

📌 BIN WIDTH & DEPTH
Bins are sized by the number of peg holes they span (Size 3 through Size 9).
✔ Inner depth: ~3.5" (90 mm)
✔ Rounded corners option — mention in order notes for a cleaner front edge

🧠 Note on usable width:
Usable bin width is slightly narrower than the peg span to accommodate built-in side brackets. For example, a 3-hole-wide bin is ~18mm (0.7") shorter than the full 3-peg span.

Approximate inner widths (usable space):
- Size 3 → ~80mm (3.15")
- Size 4 → ~120mm (4.72")
- Size 5 → ~160mm (6.30")
- Size 6 → ~200mm (7.87")
- Size 7 → ~240mm (9.45")
- Size 8 → ~280mm (11.02")
- Size 9 → ~320mm (12.60")

For carts (no peg holes required), measure your available flat space.

📌 BIN HEIGHT
✔ Available in 1" increments from 1" to 4" — mix and match to suit your needs.
⸻

📌 HOOK TYPE — CHOOSE YOUR SETUP

✔ SKÅDIS / UPPSPEL — 2x mini hooks for IKEA pegboards
✔ RÅSKOG Standard — Hooks mount outward from cart edge
✔ RÅSKOG Inward — Hooks face inside cart (only works with bins ≤2.5" tall)
✔ RÅSKOG Side — Hooks wrap around side rails (only for Size 5 or smaller)
✔ BRÄNNBOLL — 2x mini hooks for the BRÄNNBOLL rolling unit
✔ Simply Tidy Lexington — 2x mounting hooks
⸻

✅ COMPATIBILITY CHECKLIST

✔ RÅSKOG (2024 and earlier)
✔ RÅSKOG 2025 — 30 3/8" (Article 105.867.84)
✔ RÅSKOG 2025 — 24" (Article 505.917.69)
✔ RÅSHULT [Discontinued]
✔ BRÄNNBOLL Rolling Unit
✔ Simply Tidy Lexington (Michael's)
✔ SKÅDIS and UPPSPEL Pegboards

⚠️ Using a non-IKEA board or cart? Message me to confirm fit before ordering.
⸻

🪛 INSTALLATION & REMOVAL TIPS
✔ To install: Attach the mini hooks first, then slide the bin into place.
✔ To remove: Empty the bin, then gently tap upward near the hooks — do not force.
⸻

⚠️ IMPORTANT CARE NOTES
🚫 CLEANING: Not dishwasher safe — wipe clean with a damp cloth.
🔥 HEAT: PLA+ colors: avoid extreme heat (100°F+) and direct sunlight. PETG colors: more heat-tolerant. Indoor use recommended.
⸻

🎨 CHOOSE YOUR COLOR
30+ colors available to match your setup! Please use the exact color names shown in the color guide.
✔ Want different colors across multiple bins? Mention your preferred combo in the order notes.
⸻

🎨 NEW — SMOOTH OR TEXTURED
Something new I've been playing with. Use the dropdown to pick your finish — both are the same price.

✔️ Smooth — the standard finish. Clean, flat surfaces.
✔️ Textured — a fine matte surface, called "fuzzy skin" in the 3D printing world. Soft, slightly grippy feel, and it hides fingerprints and light scratches better than smooth does. It's become my favorite of the two.

Take a look at the photos to see them side by side — it's much easier to see than describe.

The texture is cosmetic only and sits on the outer faces, so fit and function are identical either way. Not sure? Go with smooth — that's what ships if you leave the dropdown alone.
⸻

🧪 MATERIAL NOTE
I print in two premium materials depending on color:
- PLA+ — strong, durable, widest color range
- PETG — extra heat-resistant and flexible
Check the color guide for which material your chosen color uses. Both priced the same — no upcharge for PETG!
⸻

✨ PLEASE NOTE
Minor surface imperfections are normal due to the 3D printing process. Each piece is made to order, so slight variations in texture, color, or layer lines may occur — these don't affect fit, strength, or function.
⸻

🔗 COMPLETE YOUR SETUP
For SKÅDIS users: pair these bins with my pegboard hooks, drawers, and shelves.
For RÅSKOG users: pair these bins with my cup holders, sliding tray, and dividers.
Check my shop for the full SKÅDIS and RÅSKOG accessory lines!
⸻

📸 SEE MORE
For more photos, updates, and new releases visit my Instagram:
👉 @mikesthingamajigs
⸻

💡 WHY BUY FROM ME?
✔ Over 1,400 five-star reviews across my shop
✔ Star Seller with fast response times (usually within a few hours)
✔ Custom-designed right here in Maryland for a precise, secure fit
✔ Printed in premium PLA+ or PETG — no cheap filament
✔ Made to order with every color matched to the guide
✔ Any issue with your order? Message me and I'll make it right.
— Mike

Materials: PLA Plus, PETG.